Smoke from domestic heating
Solid fuel heaters, such as wood heaters, are a popular means of home heating. Wood is an effective, renewable fuel when burnt efficiently. In South Australia it is estimated that approximately 14% of households use wood as their main source of energy for heating. However solid fuel heaters can be a major source of air pollution when they are poorly designed or not operated correctly.
The Environment Protection (Air Quality) Policy 2016 (Air Quality Policy) regulates the sale, installation and operation of solid fuel heaters, as well as industrial emissions and burning in the open, as they are all key contributors to air pollution, and at times can have a significant impact on air quality.
In Adelaide, poorly operated or inefficient solid fuel heaters are one of several sources of fine particles (PM2.5) which contribute to general particle levels within the metropolitan area, and contribute to the haze sometimes seen on still winter mornings. In some other areas such as Mount Gambier and the Adelaide Hills, wood smoke may be the dominant cause of poor winter air quality.
EPA has previously done air quality monitoring in both Mount Gambier and the Adelaide Hills as part of the SmokeWatch Program. During the program in Mount Gambier EPA published weekly air quality summary graphs for 2011, 2010 and 2009 which give a good indication of how air quality in winter can be influenced by domestic burning.
The EPA is currently working on developing an emissions inventory for domestic sources, including solid fuel heaters. Once ready, this inventory will provide a spatial and temporal profile of emissions from solid fuel heaters in metropolitan Adelaide.
Health impacts of wood smoke
Smoke from solid fuel heaters can have considerable health impacts, particularly in winter where people can be exposed to higher levels of pollution as a result of increased emissions combined with certain meteorological conditions that prevent smoke from dispersing. Local topography can also play a role in the dispersion of wood smoke.
When wood is burnt completely it produces carbon dioxide and water vapour which are emitted to air and an ash residue. However when wood is not burnt completely it produces smoke which is made up of a number of chemical components, including fine particles and associated gases such as nitrogen oxides, carbon monoxide, volatile organic compounds (VOCs) and polycyclic aromatic hydrocarbons (PAHs), that are harmful to human health.
Some components, such as particles and formaldehyde, are known to be carcinogenic and chronic exposure is known to cause heart and lung disease and certain cancers. Other components of wood smoke such as various acids cause irritation and scarring of the respiratory system and particularly impact the health of people with existing conditions such as asthma.
In addition to the health impacts of fine particles, smoke from solid fuel heaters can also be a significant nuisance problem for neighbours if heaters are poorly operated, as emissions are highly odorous and irritating. Wood smoke is a common source of complaints to the EPA and councils. There are things you can do if you have neighbours causing a wood smoke problem.
Using a wood heater (video)
Frequently asked questions
How can I reduce wood smoke pollution from my solid fuel heater?
Burn only dry, seasoned wood
A well-engineered solid fuel heater will still emit excessive smoke if it is burning inappropriate fuel. Freshly cut wood contains about half its weight in water. It does not burn properly, so does not produce as much heat as dry wood. This causes excessive smoke and wastes money – you are essentially paying to boil water.
Freshly cut wood should be split and stored undercover (eg under a roof to keep it dry) and in a well ventilated area. Stacking your wood loosely off the ground in a criss-cross fashion allows air to circulate freely, and maximises airing.
The minimum time recommended to store freshly split wood before burning is 6–12 months. Dry, seasoned wood should make a 'crack' when you hit one against the other, rather than the dull thud of a freshly cut log.
One of the requirements of the Air Quality Policy is that any firewood sold for use in a solid fuel heater must have a maximum moisture content of 25% dry weight (measured in accordance with AS/NZS 1080.1:2012 Timber – Methods of test, Method 1: Moisture content).
It is generally accepted that fuel with a moisture content greater than 25% dry weight doesn’t burn as efficiently, leading to substantially higher emissions (including increased PM2.5 particle pollution) contributing to impacts on human health and the environment. Fuel with a moisture content greater than 25% dry weight is not ‘fit for purpose’.
One way to ensure your firewood is properly seasoned and sustainably harvested is to buy it from a Firewood Association of Australia accredited sustainable supplier.
Hardwoods such as Mallee and Red Gum are preferable to soft woods such as Pine. Softwoods tend to contain more resins, which create smoky odours, deposits in your flue, and exhaust gases.
Do not collect wood from road sides or illegally from national parks and reserves. Never burn rubbish, driftwood, painted or treated wood. They release pollutants, some of which are toxic. Burning some materials, such as treated timber, tyres and plastic, is prohibited under the Air Quality Policy.
Keep air vents open for 20 minutes after starting and reloading the fire
The first phase of burning wood can release very high concentrations of smoke. A vigorous flame will burn off most of the smoke before it goes up the flue, so keep those air vents open.
Use kindling wood, paper or firelighters to start the fire. Add larger pieces of seasoned wood when a bed of red-hot coals is established.
Once the wood is burning fiercely, you may then turn down the controls so that the fire will give out a comfortable warmth.
Build smaller fires by adding small amounts of wood regularly and providing plenty of air. Avoid having one or two large logs smouldering in the fire with the air controls turned down.
Keep the air vents open for 15–20 minutes after you reload the fire each time.
Keep the fire live and bright but let it go out at night
Low burning and smouldering can produce up to 10 times more smoke than a brightly burning fire. Such burning will not get the best heat value out of your wood.
Excess smoke may result in creosote, tar and soot building up in your flue. This can lead to the following:
- your heater becoming harder to light
- your heater taking longer to reach a good temperature
- increased maintenance costs
- most dangerously, the possibility of a fire starting in your flue (it is recommended the flue be cleaned once a year).
To help your fire burn brightly, never over fill the heater with wood. Most heaters burn better with three or four smaller logs rather than one or two large logs. Stack them loosely so that air can circulate.
Do not set your wood heater’s convection fan too high (if fitted) as this will cause excessive cooling of the firebox.
Do not pack your fire and leave it on a low setting overnight or when you go out, as it will smoulder and produce a large amount of smoke.
Insulating your home, closing doors and drawing curtains will help to conserve the heat from your fire while it is operating and also after it has gone out. However, you should always have some fresh air flowing into the room in which your heater is located to provide air for combustion.
Check there is no smoke from your flue 20 minutes after starting your fire
Go outside and look at your flue. If after 20 minutes there is still smoke coming from your flue you may need to adjust the fuel or air vents to get a better fire.
With a little practice and care, your heater can be relatively smoke free even in the first few minutes after lighting!
Consider upgrading your heater
Newer models of solid fuel heater are engineered to be more efficient and burn more cleanly, decreasing emissions to the atmosphere. If you have an old heater that produces a lot of smoke or does not have a label showing it complies with Australian Standards AS/NZS 4012 and AS/NZS 4013, you could consider upgrading to a compliant solid fuel heater, or switch to an alternative form of heating.
How long should I store freshly cut wood before it can be used?
The minimum time recommended to store wood before burning is 6-12 months, depending on whether it is soft or hard wood, and the wood should be split, stored undercover and in a way to maximise airing.
Why does the policy include a requirement that all firewood sold contains no more than 25% moisture (dry weight)?
A well-engineered solid fuel heater will still emit excessive smoke if it is burning inappropriate fuel. This could lead to a breach of the requirement not to emit excessive smoke under clause 12 of the Air Quality Policy.
The policy prohibits the sale of firewood or solid fuel with a moisture content greater than 25% (dry weight). At this moisture level wood begins to burn inefficiently leading to increased emissions (such as increased PM2.5 particle pollution), which contribute to impacts on human health, amenity and the environment. Fuel with a moisture content greater than 25% (dry weight) is not ‘fit for purpose’ and it can be said that with higher moisture content the consumer is paying for both the weight of the water and the wood/fuel.
What if I buy firewood that is wet and has a moisture content of more than 25% (dry weight)?
Under clause 13 of the Air Quality Policy it is an offence for a person to sell firewood with a moisture content greater than 25% (dry weight). Burning wood with a high moisture content could lead to a breach of the requirement not to emit excessive smoke under clause 12. Wet wood will need to be stored for 6–12 months before it can be used. If you believe you have been sold wet firewood, contact the EPA or your local council for assistance.
How do I know if my heater is emitting excessive smoke?
It is important that you operate your heater correctly. Your solid fuel heater should only produce smoke for a short time when you first light it and when you add extra fuel. Excessive smoke can become a serious environmental nuisance for neighbours, affecting not only their health but also home comfort. An easy way to see if your heater is emitting excessive smoke is to go outside and check your flue or chimney. Compare the smoke from your flue to the chimney checker.
You are required to prevent excessive smoke from being emitted from your heater under clause 12 of the Air Quality Policy. This clause also sets out a test for ‘excessive smoke’:
Smoke emitted from a solid fuel heater is excessive if:
- a plume of smoke from the flue or chimney is visible in any direction for a continuous period of 10 minutes or more, and
- is more than 10 m long for at least 30 seconds within that time.
How does the requirement that solid fuel heaters to be sold in conformance with the Australian Standards for efficiency and emissions affect me?
All solid fuel heaters sold in SA must comply with Australian standards, so when buying a solid fuel heater make sure it has a compliance plate showing it meets the Australian Standard for efficiency (AS/NZS 4012:2014 Domestic solid fuel burning appliances – Method for determination of power output and efficiency) and emissions (AS/NZS 4013:2014 Domestic solid fuel burning appliances – Method for determination of flue gas emission). It must also be installed according to the Australian Standard (AS/NZS 2918:2001 Domestic solid fuel burning appliances – Installation).
If I buy a heater that is not compliant with Australian Standards can I get my money back?
Yes. The sale of compliant solid fuel heaters is mandatory under clause 9 of the Air Quality Policy and a breach of this provision is an offence. If this occurs contact the EPA or the Office of Business and Consumer Affairs.
Will solid fuel heaters be banned in the near future?
The SA Government does not have any plans to ban solid fuel heaters, however they are not recommended in high density living, metropolitan areas as the smoke may impact on neighbours.In some areas it may not be practical to install and run a solid fuel heater due to local topography, which can influence the dispersion of smoke and may increase the risk of smoke impacting on neighbours.
What brand of heater does the EPA recommend?
While the EPA cannot recommend a particular brand of solid fuel heater you should ensure that any heater you purchase complies with AS/NZS 4012:2014 and AS/NZS 4013:2014. Solid fuel heaters that meet these standards will display: THIS HEATER COMPLIES WITH AS/NZS 4012:2014 AND AS/NZS 4013:2014 on a plate on the back of the heater.
What to look for when buying a solid fuel heater?
Newer solid fuel heaters are engineered to burn cleaner and operate more efficiently, decreasing emissions to the atmosphere.
The Air Quality Policy requires that all new domestic solid fuel heaters sold and installed in South Australia comply with the Australian Standard for efficiency (AS/NZS 4012:2014) and emissions (AS/NZS 4013:2014), or with a standard from an overseas jurisdiction that is approved by the EPA as being equivalent to, or more stringent than, the Australian Standard. Heaters made to these standards will carry a label showing their certification.
Make sure your heater is the appropriate size for the area you plan to heat. Your local retailer should be able to provide this type of advice. A solid fuel heater running at its optimum design capacity, will produce the right amount of heat for the room or house and produce the least amount of pollution. A model that is too large for your room will need to be turned down to reduce the heat output, and this immediately reduces efficiency and increases the amount of wood smoke. Operating a heater with a smaller load of firewood than it is designed for to reduce the heat output will decrease the amount of pollution, however it will also reduce the heater’s efficiency.
Look for the following design features when looking for a heater that will burn the fuel completely and produce less smoke:
- properly designed internal baffle plates
- provision for preheating the incoming primary air to be directed through the active fire or the secondary air after the fire
- promotion of secondary combustion to reduce air pollution
- insulation of the flue as high as possible to minimise condensation fouling, and assist both dispersion and natural draught air flow to the fire.
Good design and operation will ensure enough air is supplied to burn off smoke and volatile wood components in the secondary combustion zone. This will generate more heat in the room and reduce air pollution.
Combustion system of a wood heater
How do I determine the efficiency of a wood heater?
Efficiency measures how much of the heat value contained in the firewood is extracted and delivered into the living space, so the higher the efficiency the less wood is required to produce the same amount of heat.
The efficiency rating is on the back of all solid fuel heaters, it will display: MAXIMUM AVERAGE HEAT OUTPUT BURNING HARDWOOD and OVERALL AVERAGE EFFICIENCY BURNING HARDWOOD (%). The EPA recommends you do not buy a heater that does not display this information.
How does the requirement that solid fuel heaters are installed in conformance with Australian Standards affect me?
All solid fuel heaters installed in SA must have a label showing they comply with Australian Standards for efficiency (AS/NZS 4012:2014) and emissions (AS/NZS 4013:2014), they must also be installed according to the Australian Standard (AS/NZS 2918:2001). This is a mandatory requirement and a breach of this provision is an offence.
What do I need to consider when installing a solid fuel heater?
Check with your local council before installing your solid fuel heater as it may require approval under building codes.
Installation should be conducted by a qualified tradesperson, according to manufacturer’s instructions and in accordance with AS/NZS 2918: 2001 Domestic solid fuel burning appliances – Installation.
When fitting a rain protector use a cowl that does not impede the upward flow of smoke, such as a concentric rain excluder (vertical discharge flue) or a rotating wind directional cowl if you live in a heavy rainfall area. Rain protectors such as a ‘Chinaman’s cap’ should not be used as they restrict the upward flow of hot gases and reduce the dispersion of smoke.
What is the recommended height and position of a heater chimney or flue?
The height and position of chimneys and flues is an important consideration when it comes to reducing wood smoke and preventing it entering neighbouring houses. When installing a solid fuel heater the chimney must be high enough to allow the particles and combustion gases to disperse.
The EPA recommends that the flue be 1 metre higher than the ridge line of the roof and any structure within 15 metres to minimise the potential risk of causing wood smoke and odour nuisance. If the flue is lower than the ridgeline the smoke can be caught up in the downwash or turbulence on the lee side of the building and can directly enter the house or a neighbour’s property.
Clause 10 of the Air Quality Policy requires that solid fuel heaters are installed in accordance with AS/NZS 2918:2001, which includes minimum requirements for flue height and position.
In some areas it may not be practical to install and use a solid fuel heater because the chimney would need to be very high to achieve this minimum clearance. The example below shows houses at different elevations. Installation is not recommended for houses A and B unless only smokeless fuel or a catalytic reactor stove complying with AS/NZS 4012:2014 and 4013:2014 is used.
My neighbour's solid fuel heater is causing smoke and odour problems. What options do I have?
Wood smoke can become a serious environmental nuisance for neighbours, affecting not only their health but also home comfort.
The EPA encourages neighbours to resolve problems between themselves or through mediation. We all need to give greater consideration to the impacts we might be having on our neighbours.
If your neighbour’s solid fuel heater is producing smoke or odour that is affecting the enjoyment of your property, you can do something about it.
Tell your neighbour what the problem is
You may find that your neighbour is unaware that their solid fuel heater is affecting your property.
Don’t get angry
Anger, frustration and fear can impact upon how we react to annoyance. By confronting the issue immediately you can avoid the risk of ill health caused by compounding stress. Less stress places you in a better frame of mind to constructively discuss your concerns with your neighbour. Most people are responsible and willing to help if asked.
Approaching your neighbour
Be calm not angry, focus your discussion on the issue, not the person. Help your neighbour to resolve the issue.
If approached by a neighbour
Don’t be defensive or offended. Remember—they are not there for a personal attack, it is ‘the issue’ that they are concerned about. Be friendly and work with your neighbour to find a solution.
Contact your local council
Your council can also deal with the issue utilising a range of options including the prevention of excessive smoke requirement and test set out in the Air Quality Policy.
Sometimes both parties choose to seek assistance through free mediation that includes an interpreter service. These services can be accessed via the White Pages under ‘Mediation’ or community mediation services.
Taking civil action
If the parties have been unable to resolve the issue informally through negotiation or mediation, either party can take civil action (under section 104 of the Environment Protection Act 1993) through the Environment Resources and Development Court.
When seeking ways for neighbours to live in harmony, we advise that legal action should only be considered as a last option.
Helpful tools and resources
A number of tools are available to help you use your solid fuel heater correctly, minimise harmful wood smoke pollution and save money.
- Hot Tips brochure
The brochure is a comprehensive guide to using your solid fuel heater to maximise the heat, keep your costs down and minimise wood smoke pollution.
- Chimney checker
Compare the smoke coming from your chimney with the photos on the chimney checker. Remember—your solid fuel heater should not smoke 10 minutes after start-up.
- Burn better for good
5 simple steps to keep your home fire burning better and ensure your heater is running efficiently and does not emit excessive smoke. If you would like hard copies of this brochure to distribute, please include your delivery details when ordering.
- Wood heating checklist
Are you using your wood heater correctly?
- Australian Home Heating Association
- Firewood Association of Australia
- Local Government Association Factsheet 12 – Nuisance (Smoke)
- Your local council
- Air Quality Policy
- Burning in the open
- Local nuisance and litter control
- Your nearest retailer
- Emissions from domestic solid fuel burning appliances (wood heaters, open fireplaces), Technical Report No. 5, Environment Australia, March 2002
- Woodheaters and woodsmoke, Department of Agriculture, Water and Environment
- Wood heaters in Launceston – impacts on air quality
- Wood burning heaters and your health, NSW Health
- Burn Wise, US Environmental Protection Agency